Introduction to the hot runner heaters
A hot runner coil heater is a tubular heating element made of a nickel-chromium resistance wire in a chrome-nickel steel tube filled with MgO powder. These hot runner heaters can be made into round sections and different shapes.
Information about the hot runner heaters:
I-Sheath Material: UCr Ni-Steel
I-Insulation Material: MgO
I-Resistance Wire: U-Cr 80-20
Izinga Lokushisa Lomgodla Omkhulu: 700°C
i-voltage :800V A/C
amandla :> 5 M W
Thermocouple: J uhlobo (Okujwayelekile) noma K uhlobo
Ukubekezelela Ubude (Qondile) :5%
Ukubekezelela Wattage :+ 10% ( + 5% Itholakala Ngesicelo)
Ukumelana Nokubekezela :+ 10% ( + 5% Itholakala Ngesicelo)
Ubude Obungashisiwe:35mm (Okujwayelekile)
Dimensional Tolerance Coil I.D: + 0.1 kwe 0.2mm
Ubude bekhoyili: + 1mm
Characteristics of the hot runner heaters
Suitable for coil type and coil type electric heater of hot runner
Heating rod with temperature monitoring thermocouple.
Rubber and plastics molding for industrial use – specified thermocouples and RTDs.
Features of the hot runner heaters:
1.Standard dimensions are available with various cross-sections
2.Ukuminyana kwe-watt okuhlukahlukene kuyatholakala.
3.Khetha idizayini eqinile yetheminali
4.Itholakala nge-thermocouple eyakhelwe ngaphakathi
5.Dala iphrofayili yokushisa efanayo.
6.Ukunemba kufakwe ku-nozzle yomgijimi oshisayo kanye nokuphindaphindeka.
7.Ingenabala kakhulu.
8.Ubukhulu bokudlulisa ukushisa ngenxa yendawo yokuxhumana enkulu.
9.Ubunjiniyela be-thermal obuthuthukisiwe.
Application of the hot runner heaters:
1.The manifold
2.Hot-runner nozzles and spruce shrubs
3.Imishini yokupakisha
4.Injection molding machine nozzle
