Heater Cartridger suppliers
I-Hot Core Heater Esebenza ngokukhethekile ekukhiqizeni izinhlobo ezihlukahlukene ze-heater ye-tubular enembayo yokufaka i-vacuum plating, i-nickel plating, igolide Plating, isiliva Plating, i-chrome plating kanye nezinye izinto zokusebenza ze-vacuum plating. I-vacuum electroplating tubular heater inezimo ezihlukahlukene, ukumelana nokushisa okuphezulu, ukumelana nokugqoka, impilo ende yesevisi, high conduction ukusebenza kahle, futhi igobolondo lenziwe ngeshubhu elingenamthungo elisebenza kahle kakhulu, esetshenziswa kakhulu embonini ye-vacuum.
Incazelo Yemikhiqizo
1) The heating part of the core of the Superb Heater cartridge heater is a nickel-chromium heat-resistant alloy wire, which is wound on a magnesium oxide core rod with excellent insulation and thermal conductivity. The heating wire and the shell are filled with magnesium oxide powder as an insulating material, and the air inside is compressed by the machine to make it into a whole.
2) After the main body of the cartridge heater is completed, the fixing piece or thread can be installed according to the installation needs. The thread structure of the fixing piece is related to the heating tube installation method. Please contact our sales or technical personnel for the best solution.
Due to the various shapes and specifications, it is impossible to display all of them.
If you need to customize special-shaped of cartridge heater, please contact customer service!
Model NO. Cartridge heater
Insulation Material High-Purity MGO Powder
Ukubekezelela Wattage +/-10%
Voltage Customize
Internal Thermocouple Type J or K
Warranty one year
Note: The “slash area” in the figure represents the heating section of the superb heater heating tube
1) Note: Customize the hole depth of the mold according to the length of the heating part of the cartridge heater
—If the hole is too shallow, the heating part of the cartridge heater will be exposed after installation, and there is without good heat dissipation environment, which will damage the cartridge heater and and even may cause fire and other accidents.
—If the hole is too deep, the sealing and wire part of the cartridge heater after installation will fall into a more severe use environment. Long-term use may lead to short circuit between electrodes and other problems.
2) Note: The heating tube should be protected from moisture. It is recommended to start with a low voltage during initial use.
—The cartridge heater should be moisture-proof, and it is recommended to use lower voltage for initial use.
When the superb heater cartridge heater is stored and used in a high humidity environment, the insulation resistance will decrease. but after the cartridge heater is powered on, the moisture will evaporate, and the insulation performance will gradually recover. It is recommended to start the cartridge heater with lower voltage.
Standard diameter size reference
1) DiameterΦ in mm: 2, 3, 4, 5, 6, 6.5, 8, 9.5, 10, 12, 12.5, 14, 15, 15.8, 16, 18, 19, 20, 25, 30, njll.
2) DiameterΦ inch: 1/4″, 3/8″, 1/2″, 5/8″, 3/4″, 1″, njll. (Remarks: 1 inch = 25.4 mm)
3) Note: High-power cartridge heater are used in the mold heating, and mounting holes need to be reserved on the mold according to the size of the cartridge heater (or the outer diameter of the cartridge heater can be customized according to the size of the mounting hole).Superb Heater suggest Minimize the gap between the cartridge heater and the mounting hole. When machining the mounting hole, it is recommended that the gap on one side be less than 0.05mm.
What is the difference between terminal type and inner lead?
From the figure above, we can clearly see the difference between the terminal type and the inner lead structure.
1) The terminal type is the lead rod and the lead wire are connected outside the cartridge heater through the crimping terminal.
2) The inner lead is the lead wire is directly connected from the inside of the cartridge heater.
The terminal type usually uses the glass fiber sleeve to wrap the wiring, 1. to increase the insulation protection, 2. to protect this part of the lead to avoid excessive bending
Kungani ukhethe thina?
☆ Ukuthengisa okuqondile kwasefekthri, imininingwane kanye nosayizi kungenziwa egcizelele ngokusho imidwebo.
△Sikhiqiza izinto zokushisisa zezinto ezahlukahlukene(I-PTFE,Kwe,Insimbi engagqwali 304/316L/310S,njll), ngokusho kwamakhasimende’ izidingo.
△Osayizi abaningi kanye nokuma , kanye ne-Watt & I-voltage ingenziwa ngezifiso.
☆Imikhiqizo isebenzisa izinto ezingavuthiwe zekhwalithi ephezulu ukuqinisekisa ikhwalithi yomkhiqizo.
☆ Sekela insizakalo yochwepheshe yangemva kokuthengisa ukuxazulula amakhasimende’ izinkathazo.
☆We will check the quantity and inspect the goods before deliver.
