I-heater kagesi yebhendi
Ngenxa yokudlulisa ukushisa okuhle kakhulu nokushisa okufanayo kwendawo yonke, i-Electric band heater isiphenduke isixazululo esidumile nesisetshenziswa kabanzi. Ifanele izinto zokushisisa ekubunjweni kwepulasitiki, ama-granulator epulasitiki, imishini yokuphonsa, njll.
Ama-heaters ethu e-Electric band aklanywe futhi akhiqizwa ngokuvumelana namazinga aphezulu kakhulu ukuze kuqinisekiswe ukusebenza kahle nokuthembekile.
Izifudumezi zamabhande kagesi zingenziwa ngokwezifiso ngokwezidingo ezithile zekhasimende.
Izici
1. Ukushintshaniswa kahle kokushisa nge-cylinder
2. Ukushisa okufanayo
3. Impilo ende yesevisi
4. Ukufakwa okulula
5. Ukumelana okuphezulu kwemishini
| Izinkomba zobuchwepheshe ezibalulekile | |
| Imibandela Yokusebenzisa: | Izinga lokushisa le-ambient -20 ~ + 60 ℃ |
| Ukuvuza kwamuva: | <0.5mA |
| Ukumelana nokufakelwa: | ≥ 5M |
| Ukumelana nomhlabathi: | <0.1 |
| Ukumelana ne-voltage: | Akukho ukuphuka kukagesi 1 umzuzu ngo-1500V |
| Ukumelana nezinga lokushisa: | 500-800 ℃ |
| Ukuphambuka kwamandla: | + 5%-10% |
Izinkomba zobuchwepheshe ezibalulekile
Imibandela Yokusebenzisa:
Izinga lokushisa le-ambient -20 ~ + 60 ℃
Ukuvuza kwamuva:
<0.5mA
Ukumelana nokufakelwa:
≥ 5M
Ukumelana nomhlabathi:
<0.1
Ukumelana ne-voltage:
Akukho ukuphuka kukagesi 1 umzuzu ngo-1500V
Ukumelana nezinga lokushisa:
500-800 ℃
Ukuphambuka kwamandla:
+ 5%-10%
Imininingwane yobuchwepheshe
* Amandla athile afinyelela ku-4W/cm2
* Izinga lokushisa elisebenzayo lifinyelela phezulu 320 °C
* Ishidi langaphakathi elenziwe ngensimbi eliphathwe nge-high conductivity eshisayo
* Ishidi langaphandle elenziwe ngensimbi engagqwali i-AISI 430 ukumelana namazinga okushisa aphezulu
* Ibhendi ephikisayo eyenziwe nge-Ni-Cr 80/20
* I-insulation eyenziwe nge-mica ehlanzekile yamazinga okushisa aphezulu
* Ubukhulu obujwayelekile be-heater 4 +/- 0.5 mm
* Ikhebuli ye-glass fiber insulated feeder ene-nickel emsulwa noma i-copper-nickel conductor, embozwe nge-metal braid (ngocingo lwaphansi olwakhelwe ngaphakathi) Ukuvikelwa kwangaphandle – izinga lokushisa lokusebenza 320 °C, isiqongo 350 °C
Sicela Ucacise Okulandelayo Lapho U-oda
1. I-heater yebhande likagesi ububanzi bangaphakathi (mm) kanye nobude (mm)
2. Ukuqina kwe-heater
3. Ubude betheminali (esiphezulu kanye nobuncane) kanye nebanga lobude betheminali
4. Ukupholisa tube ububanzi, ubude nebanga phakathi kwabo.
5. I-voltage namandla amakhulu
6. Igebe phakathi kwamashidi amabili (uma kusebenza)
7. Uhlobo lwezintambo nendawo
8. Whether a blower is required
9. Uma kunesidingo, the content of the stamping
10. Oda inani
11. Usuku lokuthumela
Amathegi ashisayo: electric band heater, China, abakhiqiyo, abahlinzeki, indawo yokukhiqiza, umkhuba, Isitolo esithe xaxa, thenga, intengo, micro coil heater, I-heater ye-tubular, 12 volt water tank heater, ceramic infrared heater elements, isici se-heater ye-tubular, strip heaters
