Spring Hot Runner Coil Heater
Spring Hot Runner Coil Heater
1.Product Introduction
Superb Heater coil Heaters are manufactured in round, kare& rectangular section to guarantee the maximum thermal exchange keeping an excellent efficiency.Most important applications are Nozzles for Hot Runner Systems, Hot Melting Nozzles, Manifolds etc. These Heaters can be manufactured with built-in thermocouple J or K type.
2. Spesifikasyon
 |
Boyut: | OD25mm*ID20*L50mm |
| Wire length: | 1 meter (silicone sleeve) | |
| Volts: | 220V/230V | |
| Watts: | 250K | |
| Thermocouple sensor: | J type thermocouple | |
| Minimum Order Quantity: | 3adet | |
| Usage/Application | Kalıplar & Ölür | |
| Isıtıcı Malzemesi | SS304(blackening treatment) |
| Cross Section
(mm) |
●:F1.4/Φ1.8/Φ1.6/Φ2.0/Φ2.2/Φ2.5/Φ2.7/Φ3.0/Φ3.3/Φ3.8/Φ4.0/Φ4.2/Φ5.0/Φ5.5 | |
| ▆:1.2*4.2/1.3*2.1/1.4*2.4/1.5*2/1.5*2.2/1.6*2.4/1.8*3.2/2*4/2.2*4.2/2.2*4.7/2.3*4.3/2.5*4/2.7*4.2/2.7*4.5/3*5/4*6/4.2*6 | ||
| █:3*3/3.2*3.2/3.4*3.4/3.5*3.5/4*4/5*5/6*6/8*8 | ||
| Minimum internal coiling Φ | 10mm | |
| Gerilim | 220V/230V/240V | |
| Watt toleransı | ±10% | |
| Malzeme | SS304/SS321/SS310/SS316 (Özelleştirilmiş) | |
| Rezistans | ± | |
| Dielektrik mukavemet | 600V800V 1000V | |
| Yalıtım(soğuk 1000V) | >10 MΩ | |
| Kaçak akım(soğuk) | <0,5mA | |
| Maksimum güç yoğunluğu | 10W/cm² | |
| Isıtma uzunluğu toleransı | ±2.5% | |
| Surface treatment | Sandblasting, siyah, polish, green | |
| Kılıfta izin verilen maksimum çalışma sıcaklığı | Maks.750°C / 1380°F | |
| Dahili Termokupl | K/J/E yazın | |
| Standart tedarik 1000mm PTEE yalıtımlı nikel kurşun tel | ||
3. Ürün Detayları
| Application examples
Mass channel Technology – Heating of manifolds Packaging Industry – Heating of welding bars Mass channel Technology – Heating of mass channel nozzles Packaging Industry – Heating of sealed heads |
 |
 |
Latest technical process
Fabrikamız: 1. High density, In addition to filling MgO rod, and also filled high-temperature MgO powder to achieve the optimal density. 2. Have own Tunnel furnace annealing process, focus on high quality product. Other factory: 1. Low density, just filling MgO rod, density is not up to use requirement. 2. Use a simple oven, easy to cause breakage |
| General option:
1.Straight 2.Reflection tube 3.Casted in brass |
 |
Sıcak Etiketler: spring hot runner coil heater manufacturers, tedarikçiler, fabrika
