MIYO HOT CORE HEATER บจก., จำกัด

บ้าน > Liquid heating resistance

Liquid heating resistance

Immersion heater element Immersion heater element is made of stainless steel pipe with spiral heating wire as heating element.Fully comply with GB/T241993 electrical and electronic products basic environmental test procedures, and gb4706.1-19921 household and similar electrical safety requirements.

รายละเอียดสินค้า:

Product description:
water heating tube
พิมพ์: electric water heater accessories
Brand name :แกนร้อน
แบบอย่าง: TU – 504
วัสดุ: SUS304
เส้นผ่านศูนย์กลางของหลอด :8 มม
V: 110-240 V
วัตต์: 1000-5500ว
Fran: 2 “Triclamp (OD64mm)
รูปร่าง: ripple
Use: water heating
พิมพ์: heating element
Class: water heater element

Instructions:
1 The heated liquid does not contain materials that should not be corroded by the components. The scale or carbon deposition on the surface of the tube should be removed frequently during use, otherwise the efficiency and service life of the components will be affected.
2. The operating voltage of the heating element shall not exceed 1.1 times of its rating, the environmental humidity shall not exceed 95%, and the enclosure shall be effectively grounded.
3. The electric heating element of the water heating pipe should be stored in a dry place, because be placed for long if its insulation resistance to earth less than 1 m Ω, can be in around 200 ℃ oven drying resumed after several hours.
4. When the water heating pipe is tightening the thread, don’t push the thread too hard.

เขียนถึงเรา

เกี่ยวข้องกับผลิตภัณฑ์

วิดีโอเพิ่มเติม

1
องค์ประกอบความร้อนซิลิโคนแบบกำหนดเอง
ผู้ผลิตเทอร์มินัลแท็บ
ขั้วต่อเครื่องทำความร้อนแบบท่อ
เดือยขนานลูกกลิ้งแบริ่งแบบกำหนดเอง
ส่วนหัวของเทอร์โมคัปเปิล

ลิงค์ด่วน

เชื่อมต่อ

+86 15521310300
EXPORT@HXHEATER.COM

ลิขสิทธิ์ © 2024 บริษัทสถาปัตยกรรม
ขับเคลื่อนโดย hxheater

เลื่อนไปด้านบน

แบบฟอร์มการติดต่อ