Нагревательная трубка пароварки
Electric immersion heater consists of metal tube, spiral resistance wire and crystal magnesium oxide powder with good thermal conductivity and insulation.
Функции:
1. Pipe diameter is 8mm, 10мм, 12мм, 14мм, 16мм, 18mm and 20mm
2. Center distance.(generally, the pipe diameter should be at least 8mm, the center distance should be at least 30mm, the pipe diameter 10mm, the center distance should be at least 40mm, the pipe diameter 12mm, the center distance should be at least 50mm, the pipe diameter 16mm, the center distance should be at least 70mm, the pipe diameter 20mm, the center distance should be at least 90mm, the above data are for reference only.)
3. Appearance material selection: the main materials are 10# углеродистая сталь, SUS304, SUS321, SUS316L, stainless steel coating (scale prevention treatment), SUS310S(commonly known as: 2520), титановая трубка, и т. д..
Имя: steam electrical heating tube/electric boiler electrical heating tube
Материал: 202 stainless steel tube /304 stainless steel tube (seamless tube)
Спецификации:
220В, 380V 9KW/12KW/14KW/18KW
Диаметр трубы: 10mm flange diameter: 140мм (железо)
Flange thickness: 10MM(plus or minus a little) installation hole diameter: 120мм
Friendly tip: the effective heating zone of water heating tube must be completely immersed in liquid. It is strictly forbidden to empty heat. If there is scale or carbon on the surface of the tube, it should be cleaned and reused in time to avoid affecting heat dissipation and shortening service life.
