Heating element coil factory
Coil heaters, also known as cable heaters, can be shaped according to their various applications.
Однако, coil heaters are often configured with small diameters and high performance nozzle heaters are fully annealed.
The coil heater is used for injection molding machine nozzles and gate bushing to provide 360-degree heat. Optional distributed watt-number models are available.
Coil heaters can also be used for cylindrical heaters where holes of irregular size are found.
During packaging installation, a straight, round cable heater may wind through the seal strip.
Application of industrial spring heater:
1.The manifold
2.Hot runner nozzles and spruce shrubs
3.Упаковочный механизм
4.Injection molding machine nozzle
Функции:
1.Standard dimensions available with various sections
2.Доступны различные плотности ватт.
3.Select the robust design of terminal outlet
4.Available with built-in thermocouple
5.Design uniform thermal profiles.
6.Precision mounted on hot runner nozzle and manifold.
7.Высокая нержавеющая сталь.
8.Maximum heat transfer due to more contact area.
9.Передовая теплотехника.
Спецификации:
Sheath Material:Cr ni-Steel
Изоляционный материал:MGO
Провод сопротивления: Ни кр 80-20
Максимальная температура оболочки :700°С
Напряжение: 800V A/C.
власть > 5 М.
Thermocouple J type (Стандартный) или k -тип
Допустимость длины: (Прямой) 5%
Терпимость к мощности :+ 10% ( + 5% Доступно по запросу)
Устойчивость к сопротивлению :+ 10% ( + 5% Доступно по запросу)
Неухой длина: 35мм (Стандартный)
Dimensional Tolerance Coil: ID + 0.1 до 0,2 мм
Длина катушки: + 1мм
