Ceramic Pad Heater In Oil & Gas Industry
FCPs are modular, high-temperature heating elements designed for on-site heat treatment in industrial settings. They consist of alumina ceramic beads (95% Al₂O₃) strung with nickel-chromium (NiCr) resistance wires, offering flexibility to conform to curved or complex surfaces like pipes and vessels. Primarily used for: Preheating before welding to prevent cracking. Post-Weld Heat Treatment (PWHT) for stress relief and metallurgical improvement
Product Introduction
FCPs are amazing modular, high-temperature heating elements that are perfect for on-site heat treatment in industrial settings. Amazingly, they consist of alumina ceramic beads (95% Al₂O₃) strung with nickel-chromium (NiCr) resistance wires, which offer fantastic flexibility to conform to curved or complex surfaces like pipes and vessels. This is primarily used for:
The best way to make sure you get perfect results every time is to preheat before welding. This will prevent cracking and give you the best possible finish.
Post-weld heat treatment (PWHT) is the key to stress relief and metallurgical improvement!
Specifications Of Ceramic Pad Heater In Oil & Gas Industry
| Material | 95% alumina ceramic beads, NiCr (80/20) wire |
| Voltage | 60V, 80V (standard); customizable up to 240V |
| Power | 2.7kW (60V) or 3.6kW (80V) |
| Max Temperature | 1050°C (1922°F); higher options available |
| Current | 45A (standard) |
Parameters Required For Ordering:
1. Dimensiune(Length, Width, Wire Length)
2. Voltage
3. Power
4. Quantity
Features Of Ceramic Pad Heater In Oil & Gas Industry
High-Temperature Resistance: Up to 1050°C (standard), with options for 1200°C.
Flexibilitate: Adapts to flat/curved surfaces (e.g., pipelines, tanks).
Durabilitate: Reusable ~50 cycles with proper handling.
Efficient Heat Transfer: Uniform heating via ceramic beads and NiCr wires.
Etichete fierbinți: ceramic pad heater in oil & gas industry, China, producători, furnizori, fabrică, angro, obicei, preţ, electric, calitate superioară
