MIYO 핫 코어 히터 주식회사, 제한된

> 수직 단일 튜브 금속 침수 히터

수직 단일 튜브 금속 침수 히터

Vertical Single Tube Metal Immersion Heater Product Detail 1.SUPERIOR CHEMICAL RESISTANCE : Wide variety of materials available for use in heating or cooling applications for alkaline solutions, acid solu-tions, and rinse tanks. Check solution guide or consult with your chemical supplier for proper sheath material selection. 2.LEAK FREE..

제품 세부정보:

수직 단일 튜브 금속 침수 히터

Product Detail
We offer a variety of materials to match your application (티탄, 스테인레스 스틸 304 또는 316, and plain steel) in sizes up to 36KW. Standard and custom configurations for over-the-side and bottom installations in open tanks. Thermal overtemperature protection standard (except screw plug), and our certifications include CE.

Product Descriptions:
1. The heaters are made of SUS304, SUS316 or titanium tubes with the shapes classified into vertical shape, “엘 “shape, “Zshape, 등.
2. Power of the heater is designed according to installation location, liquid chemical properties and deposition of the solid-like contents in liquid.
3. Heaters of different power with different hot zone length and the cold zone length is flexible basing on customersequipment requests. For safety design principle, hot zone of the heaters should be at least 100mm below the liquid level of the chemical plating tank.
4. Heaters power range from 500W to 36000W, voltages from 110V to 480V, both single phase and three phases are available.
5. All heaters are matched with overheat protection switch or PT100 heat detector.
6. All heaters are CE certificated with international quality standard, which insure the service life.

Product Descriptions:
1. The heaters are made of SUS304, SUS316 or titanium tubes with the shapes classified into vertical shape, “엘 “shape, “Zshape, 등.
2. Power of the heater is designed according to installation location, liquid chemical properties and deposition of the solid-like contents in liquid.
3. Heaters of different power with different hot zone length and the cold zone length is flexible basing on customersequipment requests. For safety design principle, hot zone of the heaters should be at least 100mm below the liquid level of the chemical plating tank.
4. Heaters power range from 500W to 36000W, voltages from 110V to 480V, both single phase and three phases are available.
5. All heaters are matched with overheat protection switch or PT100 heat detector.
6. All heaters are CE certificated with international quality standard, which insure the service life.

핫 태그: vertical single tube metal immersion heater manufacturers, 공급업체, 공장

우리에게 편지 쓰기

관련 제품

더 많은 동영상

맞춤형 유리 섬유 단열 부싱
유리 섬유 슬리브
유리섬유 슬리브 (2)
유리 섬유 슬리브
내열성 케이블
실리콘 고온 와이어

빠른 링크

연결하다

+86 15521310300
수출@HXHEATER.COM

저작권 © 2024 건축사무소
구동: hxheater

맨 위로 스크롤

문의 양식