집 > 롤링 밀 감소

롤링 밀 감소

Hot core Reducing Rolling Mills Reducing rolling mills use multiple sets of gears, which are connected to motors, and a set of high-torque reduction motors are set up. 이런 식으로, it can avoid that the transmission device is not strong enough or the motor is easily damaged when the large heater or the long heater is contracted. The motor and the roller shaft are connected with the Cardan shaft, so that the motor will run smoothly and the torque is increased, thereby reducing the direct force on the motor and the roller shaft, thereby protecting the motor.

제품 세부정보:

Hot core Reducing Rolling Mills

설명

기술적인 매개변수

Tube selection: round tube, flat tube, square tube, flat steel, 등.

Pipe size: heating element with large diameter and long length.

Reducing rolling mills use multiple sets of gears, which are connected to motors, and a set of high-torque reduction motors are set up.

이런 식으로, it can avoid that the transmission device is not strong enough or the motor is easily damaged when the large heater or the long heater is contracted.

The motor and the roller shaft are connected with the Cardan shaft, so that the motor will run smoothly and the torque is increased, thereby reducing the direct force on the motor and the roller shaft, thereby protecting the motor.

Reducing rolling mills data
1. The best diameter: 3-25 (mm);
2. The best length: 30-4000 (mm);
3. 기계 구조: 완전한 기계 또는 확장 (고객 요구 사항에 따라);
4. 전송 구조: double Cardan shaft;
5. Roller: can be matched with tungsten carbide roller, 고속 롤러, 및 CR12MOV 롤러;
6. We can manufacture 6-16 groups of machines, and others can be customized according to customer requirements;
7. Gearbox motor warranty: 10 연령! (Quality assurance)