The immersion water heater is composed of multiple U-shaped tubular electric heating elements. The electric heating water pipe consists of nano-conductive carbon particles and two parallel busbars with insulating layers. Due to this parallel structure, all self-limiting electric heating cables can be cut to any length on site and connected through a two-way or three-way junction box. In each heating cable, the number of circuits between the bus bars varies with the effect of temperature. When the ambient temperature cools, the conductive plastic shrinks small molecules to connect the carbon particles to form an electrical circuit. Electricity flows through the connections of these circuits, forming electrically heated water pipes.
Immersion water heaters can be widely used to heat water, oil, air, nitrate solution, acid solution, alkali solution and low melting point metals. Divided into the following situations:
1. Pipe heater: The electric heating pipe is mainly used to install in the blowing pipe of the air heating system to blow out hot air. It can be applied to heating elements of various ovens and electric stoves.
2. Nitrate solution, oil and water heating: Weld the elbow-shaped electric heating element on the flange. Electric heating tubes are used for heating in open and closed solution tanks and circulating systems.
3. Single-ended heater: The immersion water heater is used to work in the heating medium that cannot be wired at both ends, and is suitable for use in hot core boxes, core shooters and other equipment. The electric heating tube of our factory adopts domestic thick-walled seamless stainless steel tube, high-temperature magnesium oxide powder and imported sealing materials from the United States, so that the electric heating tube can withstand the temperature of 900 ℃, and the electric heating tube will not be damaged under the temporary dehydration state. The blackened mesh belt furnace has undergone high temperature nitriding treatment at 1060°C, which improves the high temperature resistance and corrosion resistance of the electric heating tube and ensures the service life.
FAQ
(1). 큐: 할인 가격을 줄 수 있습니까??
에이: 수량에 따라 다릅니다. 수량이 클수록, 더 많은 할인을 즐길 수 있습니다.
(2). 큐: 샘플을 어떻게 얻을 수 있습니까??
에이: 일반적으로 대부분의 제품에 대해 수량이 적고 고객이 운송 비용 만 부담하면 샘플 요금을 무료로 전송할 수 있습니다., 또는 DHL을 제공 할 수 있습니다,FedEx,EMS,UPS 택배 계좌 번호. 수량이 큰 경우, 샘플 수수료를 청구해야합니다.
(3). 큐: 다른 중국 공급 업체보다 가격이 조금 더 높은 이유?
에이: 우리는 모든 고객과 장기적이고 우호적 인 협력을 위해 고품질 성능 제품을 제조하는 데 중점을두고 있습니다..
우리의 가격은 아마도 가장 낮지 않을 것입니다, 그러나 우리의 비용 성능은 가장 높습니다.
(4). 큐: 대량 생산의 품질이 이전에 나에게 전송 된 샘플과 동일하게 유지하도록 보장 할 수 있습니까??
에이: 당사의 창고 직원은 샘플과 동일한 생산을 보장하기 위해 샘플을 보내기 전에 회사 이름과 동일한 샘플을 남겨 둘 것입니다.
핫 태그: immersion type water heater, 중국, 제조업체, 공급업체, 공장, 모조리, 관습, 가격, 전기 같은, 고품질
