イマージョンコイルメーカー
Injection mold hot runner coil heater/immersion coil
Heat injection type flow channel coil heater is to place the ni-cr resistance wire in the steel tube filled with MgO powder for faster and more effective heat transfer after compaction.The heater is annealed to obtain a ductility that can be bent into any shape.A hot runner heater with a built-in thermocouple is also available.Hot runner bushing with different cross sections of hot runner heater, inner brass, stainless steel jacket.
断熱材:高純度MgO
抵抗:Wire Cr20Ni80
金型の電気的強度: 800VA/C
絶縁 > 5 m/w
オプション:4*4mm,3.5*3.5mm,3.3*3.3mm,3*3mm,4.2*2.7mm,4.2*2.5mm,4.2*2.2mm,4*2mm,∅4.5mm, ∅4.2mm, ∅4mm, ∅3.8mm,ø3.45mm, ø3.2mm, and ø3.0mm
The range of heated length: 100mm—-4000mm
Cold zone length 50mm standard, and other sizes available
D of cold zone adaptor 8x30mm and 6.35x25mm optional
Standard leads 1000mm black Teflon wire over 300℃
断熱材 :OTC(U.S.A) high purity Mgo tube
Heating element High durance and high temperature NiCr2080 heating element from Germany
High voltage stability test Less than 0.5mA leak under 1000V for 30 秒
immersion coil
オプション:4*4mm,3.5*3.5mm,3.3*3.3mm,3*3mm,4.2*2.7mm,4.2*2.5mm,4.2*2.2mm,4*2mm,∅4.5mm, ∅4.2mm, ∅4mm, ∅3.8mm,ø3.45mm, ø3.2mm, and ø3.0mm
