ノズル上の熱電対付きアキシャルクランプミニコイルヒーター240V / 268W
説明
Axial clamp mini coil heaters are a proven performer for high cavitation applications including pre-forms, caps and closures, and razors. GME axial clamp heaters positively lock on the nozzle ensuring excellent heat transfer and durability. Adjustments can be made with a single front facing allen screw, greatly simplifying tightening and removal.
With flat mini coils in direct contact with the injection molding nozzle GME axial clamp heaters can be wound with more heater coils closer to the edge. This configuration improves responsiveness and heat profile.
Standard Axial Lock-up Heaters
Diameter Width Watts Volts
“3/4” “(19.05mm)” “1.2” “(30mm)” 149W 240V
“3/4” “(19.05mm)” “1.2” “(30mm)” 268W 240V
“7/8” “(22.22mm)” “1.2” “(30mm)” 268W 240V
技術仕様
Heater Sheath: CrNi Steel
High Voltage Stability: 800VAC
絶縁抵抗: >= 5M ohm at 500 VDC (Cold)
漏れ電流: <= 0.5 mA at 250VAC (Cold)
ワット数の寛容: +/- 2%, +/- 4%, または +/-10%
最大電圧: 250V
Standard Connection: 72” Teflon to 500 deg. F
特徴
Positive locking positioning
Single allen screw adjustment for tightening and removal
Mini coils in direct contact with nozzle
Replaceable external thermocouple
Profiled for more heat at the Tip
Caps and Closure Applications
Close matching of Ohms so that multiple axial clamp heaters can be controlled with a single thermocouple
Also used in Plastic molding for the cosmetic industry
応用
1. Injection Molding
2. パッケージング
3. Automotive
