Connettore termocoppia di tipo J

Connettore termocoppia di tipo J

Type J Thermocouple consists of two conductors of different materials (usually metal alloys) that produce a voltage in the vicinity of the point where the two conductors are in contact. The voltage produced is dependent on, but not necessarily proportional to, the difference of temperature of the junction to other parts of those conductors. Thermocouples are a widely used type of temperature sensor for measurement and control and can also be used to convert a temperature gradient into electricity.

Classification Type Standard Model Features Temperature Material Use Requirement
Thermocouple S WRP Precious metal 0~1600℃ Pt/Rh 10 Insertion Installation
B WRR 0~1700℃ Pt/Rh 30

R WRQ 0~1600℃ Pt/Rh 13

N WRM Normal 0~1300℃ Ni/Cr High Temperature condiciton
K WRN 0~1300℃ Ni/Si Noraml condition
J WRF 0~600℃ Fe-Cu/Ni Normal temperature
T WRC 0~600℃ Cu-Cu/Ni Normal temperature
E WRE 0~600℃ Ni/Cr-Cu/Ni Normal temperature
Classification Type Standard Model Features Temperature Use Requirement
Resistance PT10 WZP Normal -200~650℃ Stable
PT100 WZP -200~500℃ With Different Range
Cu50 WZC -50~100℃ Temperature range
Cu100 WZC -50~100℃ Temperature range

Caratteristiche：
1)Design and produce according IEC international standard.
2)fast thermal response time, whole armored configuration, antivibrante, lunga durata.
3)kinds of junction box to select to adapt different spaces.
4)Diameter of thermal resistance is φ3~φ8mm,diameter for thermocouple is φ0.5~φ8mm.
5)Convenient to fix for kinds of configurations and fixing methods.
6)Use to measure temperature in different places.
7)Temperature converted circuit available to convert figure measured to simulated figure like 4~20mA, 1~5A in order to be transmitted in long distance.
l Fili della termocoppia: Cromel-Alumel, Ferro- Costante, Costante di rame, importato luminoso & Finitura ossidata, SWG 10 A 36. PT/PTRH 10%, 13% .
l Estensione termocoppia & Cavi di compensazione: Rivestito in fibra di vetro, PVC / PVC. Amianto / Asbestosi, Teflon/Teflon, Isolato, Coppia singola intrecciata in Teflon/Fg/SS, multicoppia, Tipo K, J, T, R, e cavi RTD PT-100 2 nucleo, 3 nucleo, 4 nucleo , 6 nucleo, Anche qualità di Teflon/gomma siliconica Teflon/schermato/Teflon ecc.
l Termocoppia M.I. Cavi: SS 316, 310 & Inconel 600 qualità tipo K, J, Solo fronte 1 mm,1.5mm, Semplice & Duplex 3mm,6mm, 8mm, anche PT-100 Termocoppia RTD M I Cavi SS 316 qualità. 3mm, 5mm, 6mm 4 nucleo
l Gruppi termocoppia: Dritto, Tipo L , Tipo rotante, Tipo di bullone Inmelt, Tipo di matita, Rondella, Supporto con molla. Tipo rotante, Tipi regolabili ecc. Realizzato in tubo SS da 4,8 mm, 6mm,fornito con molla & Baionette in ottone a fessura singola & Doppia fessura , 10mm id, 12mm id, 14mm id, ecc.
Applicazione：

Type J Thermocouples (Iron-Constantan) have a smaller temperature range and a shorter lifespan at higher temperatures than the Type K but has the same reliability. Type J thermocouples are ideal for monitoring the temperatures of inert materials and in vacuum applications. Applications include heat processes such as the manufacturing of plastic and resin and in electrical furnaces
· Food processing
· Plastic moulds
· Attrezzature mediche
· Hot stamping
· Liquid immersion
· Packaging equipment
· Labeling & Sigillatura
· Dies & platens
· Injection molding
· Nuclear industry
· Car industry

Materiale eccellente
Materiale di alta qualità in primo piano. Previene efficacemente la corrosione e la ruggine,compressione antideflagrante.
Materiale del tubo:SS304/316, incoloy600 ,incoloy 800 (Può essere personalizzato)

Estensione termocoppia & Cavi di compensazione: Rivestito in fibra di vetro, PVC / PVC. Amianto / Asbestosi, Teflon/Teflon, Isolato, Coppia singola intrecciata in Teflon/Fg/SS, multicoppia, Tipo K, J, T, R, e cavi RTD PT-100 2 nucleo, 3 nucleo, 4 nucleo , 6 nucleo, Anche qualità di Teflon/gomma siliconica Teflon/schermato/Teflon ecc.

Q1. Can I Have A Sample Order?
UN: SÌ, we welcome sample order to test and check quality.

Q2. What About The Lead Time?
UN: Sample needs 3-5 giorni, mass production time needs 1-2 weeks for order quantity.

Q3. Do You Have Any MOQ Limit?
UN: MOQ basso, 1pc for sample checking is available.

Q4. How Do You Ship The Goods And How Long Does It Take To Arrive?
UN: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. Is it OK to print my logo?
UN: SÌ. Please inform us formally before our production and confirm the design firstly based on our sample.

Welcome to inquiry
Hot Tag: type j thermocouple connector manufacturers, fornitori, fabbrica