MIYO HOT NUCLEO RISCALDATORE CO., LIMITATO

Casa > Liquid heating resistance

Liquid heating resistance

Immersion heater element Immersion heater element is made of stainless steel pipe with spiral heating wire as heating element.Fully comply with GB/T241993 electrical and electronic products basic environmental test procedures, and gb4706.1-19921 household and similar electrical safety requirements.

Dettagli del prodotto:

Product description:
water heating tube
Tipo: electric water heater accessories
Brand name :NUCLEO CALDO
Modello: TU – 504
Materiale: SUS304
Tube diameter :8 mm
V: 110-240 V
Watt: 1000-5500W
Fran: 2 “Triclamp (OD64mm)
Forma: ripple
Utilizzo: water heating
Tipo: heating element
Classe: water heater element

Instructions:
1 The heated liquid does not contain materials that should not be corroded by the components. The scale or carbon deposition on the surface of the tube should be removed frequently during use, otherwise the efficiency and service life of the components will be affected.
2. The operating voltage of the heating element shall not exceed 1.1 times of its rating, the environmental humidity shall not exceed 95%, and the enclosure shall be effectively grounded.
3. The electric heating element of the water heating pipe should be stored in a dry place, because be placed for long if its insulation resistance to earth less than 1 m Ω, can be in around 200 ℃ oven drying resumed after several hours.
4. When the water heating pipe is tightening the thread, don’t push the thread too hard.

Scrivici

Correlare il prodotto

Altri video

1
Elemento riscaldante in silicone personalizzato
produttori di terminali a linguetta
Terminale riscaldatore tubolare
Tassello parallelo a rulli con cuscinetti personalizzato
parte della testa della termocoppia

LINK VELOCI

COLLEGARE

+86 15521310300
EXPORT@HXHEATER.COM

Diritto d'autore© 2024 Studio di architettura
Alimentato da hxheater

Scorri fino all'inizio

Modulo di contatto