Casa > Riscaldamento della bobina di ugelli di ottone elettrico per sistema di corridore hot

Riscaldamento della bobina di ugelli di ottone elettrico per sistema di corridore hot

Electrical Brass Nozzle Coil Heater For Hot Runner System Hot Runner Brass Nozzle Heater For Moulds Brass hot runner coil heater according with different sizes (the sprue bush or nozzle) design and manufacturing, the sleeve is made of high quality stainless steel or copper, inner sleeve, outer there are various winding section (girare, square or flat) heating coil, temperature uniformity, thermal inertia characteristics, can be integrated with the K type, J type or E type control temperature thermocpuple.

Dettagli del prodotto:

Dettagli del prodotto
Riscaldamento della bobina di ugelli di ottone elettrico per sistema di corridore hot

1.Product Introduction

S.B.T. Electrical brass nozzle coil heater for hot runner system is mainly used for hot runner mold.The main features of these heaters are 360℃ heated area, readily confirms to surface, fast response and quick heat transfer, helical coil design for superior performance, good resistance to corrosion and it can easily be coupled with J or K type thermocouple.

2. Specifica

	Misurare:	OD50mmID56L50mm
	Wire length:	1meter (Silicone Rubber)
	Volts:	240V
	Watts:	530W
	Thermocouple sensor:	K type thermocouple
	Minimum Order Quantity:	3pz
	Usage/Application	Stampi & Muore
	Heater Material	Brass

Minimum diameter Φ	10mm
Voltaggio	12V- 400V
Wattage tolerance	±10%
Materiale	SS304/SS321/SS310/SS316 (Personalizzato)
Sleeve material	Brass
Resistance	±10%
Dielectric strength	600V 800V 1000V
Isolamento(cold 1000V)	＞10 MΩ
Corrente di dispersione(cold)	＜0.5mA
Max power density	10W/cm²
Heating length tolerance	±0.05mm
Maximum working temperature allowed on sheath	Max.750℃ / 1380°F
Build-in Thermocouple	Type K/ J/ E
Standard supply 1000mm PTEE insulated nickel lead wire
Material of lead wire:Fiberglass, Kevlar, Telfon, Silicone Rubber, Metal braided, SUS armoured.

3. Dettagli del prodotto

Application examples Hot runner hearer Plastic industry Packing machine Attrezzature mediche Casting process Other electric heating industry
	Latest technical process Superb Heater factory: 1. High density, In addition to filling MgO rod, and also filled high-temperature MgO powder to achieve the optimal density. 2. Have own Tunnel furnace annealing process, focus on high quality product. Other factory: 1. Low density, just filling MgO rod, density is not up to use requirement. 2. Use a simple oven, easy to cause breakage
Caratteristiche: 1. Standard sizes available with various cross section 2. Various Watt Density options available. 3. Robust Design with Choice of Terminal Exits 4. Available with built in Thermocouple 5. Designed for even heat profile. 6. Precision fit on Hot Runner Nozzles & Manifolds. 7. Highly Non-corrosive. 8. Maximum heat transfer due to more contact area. 9. Advanced Thermal Engineering.
	Vantaggio: 1.Low MOQ: It can meet your promotional business ver-y well. 2.OEM Accepted : We can produce any your design as lo-ng as you provide us the drawing. 3.Good Service : We treat clients as friend. 4.Good Quality :We have strict quality control system .G-ood reputation in the foreigner market 5.Fast & Cheap Delivery: We are the manufacturer, have our own factory, direct delivery from the factory.