ספקי מחסני חימום
Hot Core Heater Specializing in the production of various types of precision tubular heater for vacuum plating, nickel plating, gold plating, silver plating, chrome plating and other vacuum plating equipment. The vacuum electroplating tubular heater has various shapes, high temperature resistance, wear resistance, חיי שירות ארוכים, high conduction efficiency, and the shell is made of high-performance seamless tube, which is widely used in the vacuum industry.
תיאור מוצרים
1) The heating part of the core of the Superb Heater cartridge heater is a nickel-chromium heat-resistant alloy wire, which is wound on a magnesium oxide core rod with excellent insulation and thermal conductivity. The heating wire and the shell are filled with magnesium oxide powder as an insulating material, and the air inside is compressed by the machine to make it into a whole.
2) After the main body of the cartridge heater is completed, the fixing piece or thread can be installed according to the installation needs. The thread structure of the fixing piece is related to the heating tube installation method. Please contact our sales or technical personnel for the best solution.
Due to the various shapes and specifications, it is impossible to display all of them.
If you need to customize special-shaped of cartridge heater, please contact customer service!
Model NO. Cartridge heater
Insulation Material High-Purity MGO Powder
סובלנות הספק +/-10%
Voltage Customize
Internal Thermocouple Type J or K
Warranty one year
Note: The “slash area” in the figure represents the heating section of the superb heater heating tube
1) Note: Customize the hole depth of the mold according to the length of the heating part of the cartridge heater
—If the hole is too shallow, the heating part of the cartridge heater will be exposed after installation, and there is without good heat dissipation environment, which will damage the cartridge heater and and even may cause fire and other accidents.
—If the hole is too deep, the sealing and wire part of the cartridge heater after installation will fall into a more severe use environment. Long-term use may lead to short circuit between electrodes and other problems.
2) Note: The heating tube should be protected from moisture. It is recommended to start with a low voltage during initial use.
—The cartridge heater should be moisture-proof, and it is recommended to use lower voltage for initial use.
When the superb heater cartridge heater is stored and used in a high humidity environment, the insulation resistance will decrease. but after the cartridge heater is powered on, the moisture will evaporate, and the insulation performance will gradually recover. It is recommended to start the cartridge heater with lower voltage.
Standard diameter size reference
1) DiameterΦ in mm: 2, 3, 4, 5, 6, 6.5, 8, 9.5, 10, 12, 12.5, 14, 15, 15.8, 16, 18, 19, 20, 25, 30, וכו.
2) DiameterΦ inch: 1/4″, 3/8″, 1/2″, 5/8″, 3/4″, 1″, וכו. (Remarks: 1 inch = 25.4 מ"מ)
3) Note: High-power cartridge heater are used in the mold heating, and mounting holes need to be reserved on the mold according to the size of the cartridge heater (or the outer diameter of the cartridge heater can be customized according to the size of the mounting hole).Superb Heater suggest Minimize the gap between the cartridge heater and the mounting hole. When machining the mounting hole, it is recommended that the gap on one side be less than 0.05mm.
What is the difference between terminal type and inner lead?
From the figure above, we can clearly see the difference between the terminal type and the inner lead structure.
1) The terminal type is the lead rod and the lead wire are connected outside the cartridge heater through the crimping terminal.
2) The inner lead is the lead wire is directly connected from the inside of the cartridge heater.
The terminal type usually uses the glass fiber sleeve to wrap the wiring, 1. to increase the insulation protection, 2. to protect this part of the lead to avoid excessive bending
למה לבחור בנו?
☆ מכירות ישירות במפעל, ניתן להתאים את המפרט והגדלים בהתאם לציורים.
△ אנו מייצרים אלמנטים חימומיים של חומרים שונים(PTFE,שֶׁל,נירוסטה 304/316L/310S,וכו), לדברי הלקוחות’ דרישות.
△ גדלים וצורות מרובות , והוואט & ניתן להתאים אישית מתח.
☆ מוצרים משתמשים בחומרי גלם באיכות גבוהה כדי להבטיח את איכות המוצר.
☆ תומכים בשירות מקצועי לאחר המכירה כדי לפתור לקוחות’ דאגות.
☆We will check the quantity and inspect the goods before deliver.
