Calentador de cartucho transformado
Información general
AUSTIN Heating Technology manufactures custom made cartridge heaters for any application. Electric cartridge rod heaters are a versatile and economical heat source for a wide variety of industrial and commercial applications.
Standard tube diameters are 6mm, 8milímetros, 10milímetros, 12mm and 16mm, but other special sizes are available for cartridge heaters. Dependiendo del diámetro, Se pueden suministrar longitudes de hasta 6000 mm.. Standard sheath materials are Stainless Steel 201, 304, 316 y 321, pero pueden estar disponibles materiales de funda especiales según el diámetro y el tamaño del elemento requerido.
Electric cartridge heaters provide superior heat transfer, uniform temperatures, resistance to oxidation and corrosion and long life even at high temperatures. Flexible lead wire extensions or other mounting options are available for specific applications.
Presupuesto:
Tolerancia a la potencia +5%, -10%
Tolerancia de resistencia +10%, -5%
Voltages available 380V,240V, 220V,110V,36V,24V o 12V
Temperatura máxima de funcionamiento 870ºC(1600F)
Length tolerance ± 2% or 3.2mm (1/8″), whichever is greater.
Camber tolerance 1.7mm per meter (0.020″ per foot).
Diameter tolerance Diameter at each end may vary +0.05mm -0.1milímetros (+.002″ -.004″)
Standard Unheated Area 5-10mm;
Internal thermocouple type J or K;
Ubicación del termopar Extremo del disco, Vaina, Centro de calentador;
Resistencia de aislamiento (frío) ≥ 500 MΩ;
Corriente de fuga máxima (frío) ≤ 0.5 mamá;
Diameter from 3.0mm to 30mm;
Construcción:
1. Acero, acero inoxidable, cobre, or Incoloy sheathed elements.
2. Element wire situated in proximity to outside surface for maximum heat transfer and minimum internal temperature while preserving good dielectric qualities
3.Pure magnesium oxide compressed to an optimum density for best heat transfer and electrical insulation at elevated temperatures.
4. Weld connection.
5. Cold pin
6. Aislante.
7. Standard post terminal.
Characters:
1.Resistor core assembly is accurately spaced close to the outer sheath for efficient heat transfer.
2.Initial heater diamete
