Spring Hot Runner Coil Heater
Spring Hot Runner Coil Heater
1.Product Introduction
Superb Heater coil Heaters are manufactured in round, square& rectangular section to guarantee the maximum thermal exchange keeping an excellent efficiency.Most important applications are Nozzles for Hot Runner Systems, Hot Melting Nozzles, Manifolds etc. These Heaters can be manufactured with built-in thermocouple J or K type.
2. مواصفة
 |
مقاس: | OD25mm*ID20*L50mm |
| Wire length: | 1 meter (silicone sleeve) | |
| Volts: | 220V/230V | |
| Watts: | 250دبليو | |
| Thermocouple sensor: | J type thermocouple | |
| Minimum Order Quantity: | 3pcs | |
| Usage/Application | قوالب & يموت | |
| Heater Material | SS304(blackening treatment) |
| Cross Section
(مم) |
●:Φ1.4/Φ1.8/Φ1.6/Φ2.0/Φ2.2/Φ2.5/Φ2.7/Φ3.0/Φ3.3/Φ3.8/Φ4.0/Φ4.2/Φ5.0/Φ5.5 | |
| ▆:1.2*4.2/1.3*2.1/1.4*2.4/1.5*2/1.5*2.2/1.6*2.4/1.8*3.2/2*4/2.2*4.2/2.2*4.7/2.3*4.3/2.5*4/2.7*4.2/2.7*4.5/3*5/4*6/4.2*6 | ||
| █:3*3/3.2*3.2/3.4*3.4/3.5*3.5/4*4/5*5/6*6/8*8 | ||
| Minimum internal coiling Φ | 10مم | |
| الجهد االكهربى | 220V/230V/240V | |
| التسامح القوة الكهربائية | ±10% | |
| مادة | SS304/SS321/SS310/SS316 (مخصصة) | |
| مقاومة | ±10% | |
| قوة عازلة | 600الخامس 800 فولت 1000 فولت | |
| العزل(بارد 1000 فولت) | >10 مΩ | |
| تسرب الحالي(بارد) | أقل من 0.5 مللي أمبير | |
| أقصى كثافة للطاقة | 10ث/سم² | |
| تحمل طول التسخين | ±2.5% | |
| Surface treatment | Sandblasting, أسود, polish, green | |
| الحد الأقصى لدرجة حرارة العمل المسموح بها على الغلاف | الحد الأقصى 750 درجة مئوية / 1380درجة فهرنهايت | |
| بناء في الحرارية | اكتب ك/ي/ه | |
| العرض القياسي 1000 مم PTEE سلك الرصاص النيكل المعزول | ||
3. تفاصيل المنتج
| Application examples
Mass channel Technology – Heating of manifolds Packaging Industry – Heating of welding bars Mass channel Technology – Heating of mass channel nozzles Packaging Industry – Heating of sealed heads |
 |
 |
Latest technical process
مصنعنا: 1. High density, In addition to filling MgO rod, and also filled high-temperature MgO powder to achieve the optimal density. 2. Have own Tunnel furnace annealing process, focus on high quality product. Other factory: 1. Low density, just filling MgO rod, density is not up to use requirement. 2. Use a simple oven, easy to cause breakage |
| General option:
1.Straight 2.Reflection tube 3.Casted in brass |
 |
العلامات الساخنة: spring hot runner coil heater manufacturers, الموردين, مصنع
