Hot core Pipe Cutting Machine
وصف
المعلمات الفنية
The pipe cutting machine is a high-quality product produced by us, which is used to cut the heating pipe. The production efficiency of the pipe cutting machine is very high, and it can cut about 10,000 in 8 ساعات.
رقم: FHCT-15
technical parameter:
قوة المحرك: 380V 50HZ 750W
Speed: 900rpm 1800rpm
Maximum inner diameter: Φ15 mm
Air source: 0.6MPA, can clean compressed air at the same time
حجم الآلة: 1140 * 870 * 720مم
CT-15 pipe cutting machine:
1) CT-15 pipe cutting machine uses a set of rotating fixtures.
2) The tube is rotated by the elastic chuck.
3) The slicer blade will cut the tube, which is controlled by the blade angle. There is no burr on the end face of the cut tube, which solves the cleaning problem.
4) The pneumatic mechanism controls the elastic chuck and works with the cutter. The production efficiency is very high. عن 10,000 pieces can be cut in 8 ساعات.
5) The limit mechanism is used to adjust and control the cutting length.
6) When using Pipe Cutting Machine, users must make their own charging barrel and bracket according to the center height of the machine.
قوة: 0.75كيلوواط
Cutting speed: According to the specifications of the pipe, usually about 10,000 pieces/8 hours
Can cut tube: Φ5-Φ15mm (يمكن تخصيصها)
قوة المحرك: three-phase 380V 50HZ (يمكن تخصيصها)
العلامات الساخنة: pipe cutting machine, الصين, الشركات المصنعة, الموردين, مصنع, مخصص, بالجملة, يشتري, سعر, تكلفة آلة X Ray, آلة الطحن بدون مركز, X Ray Equipment, آلة متعرج, سعر آلة آلة الأشعة, سعر آلة الوسم بالليزر
